FRANCE ETUVES
Our XAS drying cabinets are optimized for drying your laboratory glassware.
- Glassware drying
- Glassware storage
- For all laboratories
Glassware drying cabinets are designed to dry and store glassware by injecting air into the volume at an adjustable temperature of up to 60°C. The moderate circulation of air inside the cabinet is also suitable for gentle drying.
They are functional, easy to use, easy to maintain and economical.
Ergonomic construction
Two volumes: 320 liters and 800 liters.
The double-leaf door is made of impact-resistant safety glass, which allows you to always see what has been stored in the cabinet.
The interior and exterior are made of electrogalvanized sheet metal covered with white epoxy paint.
The control panel is placed in the upper part of the cabinet.
The XAS800 model has swivel casters allowing the cabinet to be easily moved. A foot integrated into the casters and adjustable in height allows you to stabilize the cabinet and level it.
Heating Heating
is provided by pin-shaped resistors under stainless steel shielding, ideally placed in the air flow.
The air from the useful volume is sucked in by fans located in the cap of the oven, is heated by the resistances then is blown into the useful volume through the lower rear part.
This air recycling as well as a permanent air renewal of 15m 3 /h allow optimized drying of your glassware.
Humid air escapes through an opening on the top of the cabinet.
Regulation, Control
The C3030 temperature regulator/programmer from FRANCE-ETUVES is very precise and particularly reliable.
Measurement by PT100 or TCJ probe. Electronic PID regulator. Accuracy: 0.1°C.
Color screen, excellent visibility of temperatures
Functions:
– display of the set temperature and that measured
– display (in percentage) of the heating power used
– display of the date and time
– possibility of making 1 program of 8 segments : 4 programmable temperature ramps (° C/min) and 4 temperature maintenance levels (max 9999min)
– delayed start
– repeat loop
– monitoring of your current program (step and remaining time)
– pause or stop the program
– end of cycle buzzer
– PID adjustment
– possibility of adding temperature correction at 2 distinct temperatures (offsets)
An independent non-adjustable safety thermostat (class 3.1 protection), with audible and visual alarm, protects your products and the cabinet.
